Thin painted epoxy flooring

Features: overall smoothness, strong adhesion, abrasion resistance, acid and alkali resistance, moisture-proof, mildew proof, gorgeous color, and easy to clean, simple construction, short construction period, cost economy.

Application scope: floor foundation is good, no heavy load light industry workshop, parking lot, writing room, warehouse, dust-free wall, ceiling painting, old epoxy resin floor repair, etc..

Construction steps:
First, the ground treatment: grinding the original ground with the mill, and then dust removal;
Two, bottom coating: epoxy resin primer with good trowels scraping in clean dust on the ground;
Three, midway: after the primer coating after curing, and then prepared in the paint with a trowel scraping in undercoat (according to the ground can be scraped many times);
Four, surface coating: to be cured after coating, remove the protrusions of particles and other debris, with the roller coated with good surface coating roll on the coating.


Epoxy glass fiber resin floor

Features: can improve the strength and integrity of the floor substrate, strong adhesion, not easy to crack, water leakage, excellent anti-corrosion performance, not easy to aging, beautiful, easy to clean.

Scope of application: it is necessary to strengthen the tensile cement ground or strong acid, strong alkali, chemical solvent, anti-corrosion ground floor and drainage ditch, etc..

Construction steps:
A ground treatment: first remove the original debris on the ground, the ground is rough, and dust;
Two, bottom: bottom coating with good trowels scraping in clean dust on the ground;
Three, the glass fiber layer: after the primer coating after drying, the glass cloth shop on the ground, then pour in the resin glass fiber cloth, with uniform scraping trowel;
Four, to be coated: glass fiber layer after the resin curing, and then remove the burr mill processes, then sweeping and dusting, and then prepared in the paint with a trowel trowelling in glass fiber layer;
Fifth, surface coating: coating to be completely cured, used to mill the polished surface roughness, dust removal, cleaning, the surface coating prepared with a trowel trowelling in paint.


Epoxy resin mortar floor

Characteristics: abrasion resistance, impact resistance, good hardness; resistance to chemical solvents, acid, alkali and salt corrosion of media can be made into a surface; surface slip or matte effect.

Scope of application: the requirements of ground wear resistance, resistance to a certain impact of electronic and electrical equipment, machinery factory. It can drive 1-2 ton forklift, heavy handcart, etc., especially suitable for the first floor and uneven ground.

Construction steps:
First, the ground treatment: grinding the whole ground with the mill once, then cleaning, dust removal;
Two, bottom coating: prepared epoxy coated with a trowel scraping in clean dust on the ground;
Three, mortar layer: after the primer coating after curing, resin, quartz sand mixing, with a trowel scraping in the bottom coating on (according to the different thickness of quartz sand, using different mesh);
Four, in the coating: to be mortar layer after curing, the resin prepared by trowel trowelling in mortar layer;
Five, surface coating: coating to be completely solidified, and then mill the surface down again, then sweeping and dusting, surface coating and epoxy filtering will be good, with a trowel trowelling in coating.


Emery hardening agent wear-resisting floor

Characteristics: 1. After curing, the surface hardness is high, wear resistance, dust can not afford;
2. Make the ground withstand large impact load;
3, with the whole soil cement bonding, can not drum, not fall off;
4, hard and dense surface can resist grease, special hydraulic oil and a variety of industrial chemical reagents penetration and penetration;
5, daily cleaning convenient and simple, save materials, reduce costs.

Scope of application: it is suitable for most industrial plants, warehouses, parking lots, warehouse type shopping malls, etc., especially in the areas where vehicles are moving.


Epoxy anti-static floor

Features: all have excellent performance of epoxy resin floor, rapid excretion of electrostatic charge, antistatic effect, durable surface resistivity reaches 10, 5-109, the ground resistance excretion in line with international standards GB6650-86A.

Scope of application: biological engineering workshop, electronics, microelectronics workshop, clean room, electronic components production area, semiconductor workshop SMT, bonding workshop, etc..

Construction steps:
First, the ground treatment: first grinding the whole ground with a mill, then cleaning, dust removal;
Two, bottom coating: coating at the end of the deployment of a good trowels scraping in clean dust on the ground;
Three, the copper net cloth: after the primer coating after curing, copper layer laying anyway 3 meters square on the ground, and leave the ground box;
Fourth, the conductive mortar layer: copper network layout is completed, will adjust the good guide material, quartz sand mixing, scraping in copper net layer;
Five, conductive coating: to be mortar layer after curing, will adjust the good conductive coating with a trowel scraping in mortar layer;
Six, conductive putty layer: after the coating is cured, then grinding again with the mill, and then cleaning, dust removal, and then transferred the conductive putty batch on the middle coating;
Seven, anti-static surface coating: putty layer after curing, surface coating will be tuned with a trowel trowelling in putty layer.


Epoxy resin sand floor

Features: overall smoothness, corrosion resistance, high wear resistance, transparent and smooth surface, bright colors.

Scope of application: areas with high mechanical and aesthetic requirements. Such as: food factory, electronic factory, shopping mall, exhibition hall, corridor, automobile exhibition hall, etc..

Construction steps:
First, the ground treatment: grinding the whole ground with the mill once, then cleaning, dust removal;
Two, bottom coating: transparent resin prepared by scraping trowel in the dust on the floor clean;
Three, color mortar layer: to be cured after coating, transparent resin,