Supply room is an indispensable Department of hospitals. Its main responsibility is to supply sterile dressings and instruments to other clinical departments, and to complete the recovery, sterilization and classification of various medical devices. Thus, the hospital supply room plays an important role in the hospital. However, at present, because the Department is facing all departments with a variety of types, if not thoroughly disinfected, it will cause hospital infection, which is not conducive to the treatment of patients and the development of hospitals. Therefore, it is important and urgent to carry out a reasonable layout of hospitals and equipment configuration.
Equipment Configuration of Hospital Supply Room
It mainly includes disinfection and sterilization, cleaning, water supply equipment and related auxiliary equipment, such as ultrasonic cleaning machine, pulsating vacuum sterilizer, water purifier, low temperature plasma sterilizer, dryer, automatic instrument cleaning machine, steam generator and rigid endoscope cleaning center.
Rational Layout of Hospital Supply Room
According to the task characteristics of the Department and the relevant regulations of the hospital, it is generally divided into three parts: sterile zone, polluted zone and clean zone. According to the functions of all kinds of instruments, they are localized regionally. Generally, the contaminated area is placed between the clean area and the contaminated area by cleaning trough, ultrasonic cleaning machine and rigid endoscope washing system, and the other two are placed between the sterile area and the clean area by automatic instrument cleaning machine, transfer window and dryer. It is low temperature plasma sterilizer and pulsating vacuum sterilizer, etc. 2. In the maintenance room, steam generator can be placed in a separate room in the decontamination area, such as water storage tank and water purifier.
Material and partition
The color steel plate with thickness of 50mm is used as the barrier wall of each area. When the equipment is partitioned, stainless steel wire drawing is usually used to act on the front and back ends of the cleaning and disinfection machine and the sterilizer. At the same time, the larger and heavier equipment should be positioned first, then partitioned and cut the wall according to the size of the equipment, and embedded in the wall. 2 mm thick homogeneous transparent pale pink PVC floor was used as floor material in decontamination area; 2 mm thick homogeneous transparent pale yellow PVC floor was used as floor material in cryogenic sterilization room, dressing packing room, sterilization area, packaging area, cleaning goods receiving room, inspection packaging room and disposable goods; 2 mm thick homogeneous transparent pale blue was used as floor material in decontamination area. Colored PVC floors are used as floor materials in buffer rooms. 300 x 300 mm anti-skid floor tiles are used as floor materials in dressing rooms, car cleaning rooms and water treatment rooms; 300 x 600 mm high-grade wall tiles are used as wall materials; 600 x 600 mm high-grade polished floor tiles are used as floor materials in corridors and offices; electrophoretic aluminium alloy profiles arc materials are used in the transition of 90 Yin and Yang angles for electrophoresis. Aluminum alloy is used as door and window frame, stainless steel door cover is used as door and window.
Installation of Purification Ventilation Device
The main areas requiring installation of purification and ventilation devices are disposable goods room, sterilization area, inspection and packaging room, sterile goods storage room, dressing packing room and low temperature sterilization room. The suction-top air purifier and disinfector which meets the requirements of relevant standards should be selected to produce a lot of heat during operation, so it needs to be installed. In the decontamination area, in order to satisfy the negative pressure, it should also be installed. At the same time, in order to satisfy the pressure difference in the essence area, the cleaning ventilation device should also be installed.
Construction and Materials of Water, Gas and Electricity
In general, stainless steel pipes are used as water pipes for installation of water supply and drainage facilities, while PPR pipes are used as water pipes for tap water. Water purifiers should be connected with rigid endoscope washing system, steam generator and automatic instrument cleaning machine, so as to effectively reduce the damage caused by impurities in water to equipment and tap water. Connect with sterilizer, etc. And all the pipelines must be arranged on the ceiling for later maintenance and inspection. When installing electricity, the light in general living area is grille lamp, and the light in working area is purified fluorescent lamp. The distribution sub-box and total distribution box should be set in supply room. The setting of the sub-box is mainly determined by the quantity of instruments and equipment in this department. At the same time, the socket and switch need to be configured in the street, and the socket panel should be configured according to the power and voltage of the electrical equipment. Set the network port and telephone port in the office and each functional area. The wires are laid in the color steel plate and the sleeves and threads are made to have a beautiful effect. For equipment with exhaust and drainage, pipes should be reserved, galvanized steel pipes should be used as drainage materials, UPVC pipes should be used as domestic sewage equipment, seamless steel pipes should be used as steam pipes, and the selection of valves must be qualified.
conclusion
Supply room belongs to an important department in a hospital. The rationality of its equipment configuration and layout has a direct impact on the quality of medical and health care in a hospital. Therefore, in the later stage of work, it is necessary to do a good job in the related work of supply room, ensure medical and health quality, avoid hospital infection and promote the development of medical cause.
Established in August 2010, Shandong Aide Purification Engineering Co., Ltd. has devoted ten years to the construction of special departments in hospitals. It is a laminar operation room purification, clean operation room decoration, ICU ward construction, neonatal NICU construction, CCU ward, hospital laboratory, central supply room decoration, laminar flow ward construction, venous configuration center design. Construction of professional enterprises. The main target of service is large, medium and small hospitals with professional contracting qualifications related to purification projects. There are many cases in the industry. Welcome new and old customers to consult. To learn more about the medical purification industry, please pay attention to the Wechat Public No. Aide-188 (Ed Purification and Oxygen Supply)