Supply room is an indispensable Department of hospitals. Its main responsibility is to supply sterile dressings and instruments to other clinical departments, and to complete the recovery, sterilization and classification of various medical devices. Thus, the hospital supply room plays an important role in the hospital. However, at present, because the Department is facing all departments with a variety of types, if not thoroughly disinfected, it will cause hospital infection, which is not conducive to the treatment of patients and the development of hospitals. Therefore, it is important and urgent to carry out a reasonable layout of hospitals and equipment configuration.
Equipment Configuration of Hospital Supply Room
It mainly includes disinfection and sterilization, cleaning, water supply equipment and related auxiliary equipment, such as ultrasonic cleaning machine, pulsating vacuum sterilizer, water purifier, low temperature plasma sterilizer, dryer, automatic instrument cleaning machine, steam generator and rigid endoscope cleaning center.
Rational Layout of Hospital Supply Room
According to the task characteristics of the Department and the relevant regulations of the hospital, it is generally divided into three parts: sterile zone, polluted zone and clean zone. According to the functions of all kinds of instruments, they are localized regionally. Generally, the contaminated areas are placed between the clean areas and the contaminated areas by cleaning troughs, ultrasonic cleaning machines and rigid endoscope washing systems. The two places are automatic equipment cleaning machines, transfer windows and dryers. The two places between the sterile areas and the clean areas are low temperature plasma sterilizers and pulsating vacuum sterilization. Steam generators can be placed in the maintenance room and water storage tanks and water purifiers can be placed in separate rooms in the decontamination area.
Material and partition
The color steel plate with thickness of 50mm is used as the barrier wall of each area. When the equipment is partitioned, stainless steel wire drawing is usually used to act on the front and back ends of the cleaning and disinfection machine and the sterilizer. At the same time, the larger and heavier equipment should be positioned first, then partitioned and cut the wall according to the size of the equipment, and embedded in the wall.
Homogeneous transparent light pink PVC floor with thickness of 2 mm was used as floor material for decontamination area.
The 2 mm thick homogeneous and transparent light yellow PVC floor was used as floor materials in low temperature sterilization room, dressing packing room, sterilization area, packaging area, cleaning goods receiving room, inspection and packaging room and disposable goods room.
The 2 mm thick homogeneous transparent light blue PVC floor was used as the floor material of buffer room.
The anti-skid floor tile of 300X300mm is used as ground material in dressing room, car cleaning room and water treatment room.
300 x 600 mm high-grade wall tile is used as wall material.
600x600mm high-grade polished floor tiles are used as floor materials for corridors and offices.

The electrophoretic aluminum alloy profile circular arc material is used for the transition between 90 Yin Yang angles. The aluminum alloy material is used for making the door and window frame, and the stainless steel door cover is used for making windows and doors.

Installation of Purification Ventilation Device
The main areas requiring installation of purifying and ventilating devices are as follows:
Disposable goods room, sterilization area, inspection and packaging room, sterile goods storage room, dressing packing room and low temperature sterilization room. The suction-top air purifier and disinfector which meets the requirements of relevant standards should be selected to produce a lot of heat during operation, so it needs to be installed. In the decontamination area, in order to satisfy the negative pressure, it should also be installed. At the same time, in order to satisfy the pressure difference in the essence area, it should also install the purification ventilation device.
Construction and Materials of Water, Gas and Electricity
Generally, stainless steel pipes are used as water pipes for the installation of pure water supply and drainage facilities. When PPR pipes are used as tap water supply pipes, the water purifier should be connected with the rigid endoscope cleaning system, the steam generator and the automatic instrument cleaning machine, so as to effectively reduce the damage caused by impurities in the water, and connect the tap water with the sterilizer. And all the pipelines must be arranged on the ceiling for later maintenance and inspection.
When installing electricity, the light in general living area is grille lamp, and the light in working area is purified fluorescent lamp. The distribution sub-box and total distribution box should be set in supply room. The setting of the sub-box is mainly determined by the quantity of instruments and equipment in this department. At the same time, the socket and switch need to be configured in the street, and the socket panel should be configured according to the power and voltage of the electrical equipment. Set the network port and telephone port in the office and each functional area.
The wires are laid in the color steel plate and the sleeves and threads are made to have a beautiful effect. For equipment with exhaust and drainage, pipes should be reserved, galvanized steel pipes should be used as drainage materials, UPVC pipes should be used as domestic sewage equipment, seamless steel pipes should be used as steam pipes, and the selection of valves must be qualified.
conclusion
Supply room belongs to an important department in a hospital. The rationality of its equipment configuration and layout has a direct impact on the quality of medical and health care in a hospital. Therefore, in the later stage of work, it is necessary to do a good job in the related work of supply room, ensure medical and health quality, avoid hospital infection and promote the development of medical cause.
Shandong aide purification engineering Limited by Share Ltd was founded in 2010, 08 years, ten years dedicated to the construction of special departments in hospitals. It is a specialized enterprise in laminar operation room purification, clean fitting, ICU ward construction, neonatal NICU construction, CCU ward, hospital laboratory, central supply room decoration, laminar flow ward construction, venous configuration center design and construction. The main target of service is large, medium and small hospitals with professional contracting qualifications related to purification projects. There are many cases in the industry. Welcome new and old customers to consult. For more knowledge of medical purification industry, please pay attention to the public address: Aide-188 (Ed purify oxygen supply).