What problems should be paid attention to in the operation of food purification workshop?
Release time:2019-10-11 source:
The food factory purification workshop can effectively solve the unstable temperature and humidity and low cleanliness in the production workshop. So what problems do we need to pay attention to when the food factory purification workshop is running? Runde Purification Division has arranged the detailed contents for you. There are many matters needing attention in the food factory purification workshop. Only by doing these well, can this project bring into full play its maximum value.
Food Factory Purification Workshop
1. Purification operations must be carried out strictly in accordance with the prevailing trend to avoid microbial contamination. Operators should turn off the ultraviolet lamp before entering the workshop.
2. There should be a cleaning operation room and a buffer room. The cleanliness of the cleaning operation room should reach 10,000 grade. The indoor temperature should be between 20 and 24 degrees C, and the humidity should be between 45 and 60 percent. The cleanliness of the ultra-clean table should reach 100 levels.
3. All the instruments, instruments and dishes that need to be brought into the purification workshop of food factories should be tightly wrapped and sterilized by appropriate methods.
4. We should insist on cleaning and prohibit the accumulation of debris in order to prevent pollution. Beware of contamination of all sterilizing devices and media. Those who have been contaminated should stop using them.
5. Sterilize and clean the workshop regularly with suitable disinfectant to ensure that the cleanliness of the workshop meets the requirements.
6. Before inspecting the samples, the outer packing should be kept intact and not open to prevent pollution. Before checking, disinfect the appearance with 70% alcohol cotton ball.
7. Before workers enter the workshop, it is necessary to wash and disinfect their hands with soap or disinfectant, and then replace special clothes, shoes, hats, masks and gloves in the buffer room (or scrub their hands again with 70% ethanol) before entering the sterile room for operation.
8. It is necessary to turn on the ultraviolet lamp to sterilize for more than 30 minutes before the workshop is used, and turn on the ultra-clean table together for blowing. At the end of operation, the workshop should be cleaned up in time and sterilized by ultraviolet lamp for 20 minutes.
Ed Purification has developed for many years in the purification industry and has a high reputation. Through many purification engineering practices, it has accumulated rich experience and high efficiency profession. It can provide excellent food factory purification workshop services for food factories. For more knowledge of the medical purification industry, please pay attention to the Wechat Public No. Aide-188 (Ed Purification and Oxygen Supply)