The installation technology of electric operating table in hospital operating room purification project
Release time:2019-10-31 source:
The electric comprehensive operating table is a reliable and efficient medical equipment in the ICU of operating room. It is an indispensable product in the modern operating room. It can be used in cardiothoracic, nerve, liver and kidney, gynecology and other operations. So, what are the key points of electric integrated installation? Next, please look at the following specific instructions together with Xiaobian!
Detailed analysis of the installation points of the electric comprehensive operating table:
1. Installation of head plate: according to the structural diagram of the electric operating table, loosen the two plum knobs at the lower side of the back plate neck to a certain position, first insert the two fixing columns of the head plate into the back plate hole, then tighten the two plum knobs at the lower side of the back plate neck, and then adjust the angle of the head plate according to the operation needs.
2. Installation of arm bracket and leg bracket: according to the structural diagram of the operating table, at the position of arm bracket and leg bracket, first loosen the plum knob on the corresponding locking device, then insert the inserting rod of arm bracket and leg bracket into the corresponding locking device hole, adjust the height according to the operation needs, and then lock it reliably.
3. Installation of shoulder card, waist card, anesthesia frame and other accessories: according to their positions, refer to the installation of arm bracket and leg bracket.
4. Debugging with electric push rod as power: according to the required posture of the operation, control and adjust the electric lifting and the turning of each part with the hand-held operator, press according to the indication marked by the hand-held operator, click to achieve the best posture, release the hand-held operator and lock it automatically.
5. Commissioning with pneumatic spring as power: pneumatic folding device is installed at the bottom of the corresponding pneumatic folding component. To make the component reach the required angle, there is a needle valve at the end of the piston rod of the self-locking pneumatic spring. If the needle valve is opened with a specially installed handle (at the bottom), the self-locking pneumatic spring can freely adjust the position, so as to realize various actions of the operating table and loosen it. When the needle valve is opened, the self-locking gas spring can lock itself in the position at that time, and the self-locking force is very large, which can support the patient.
The above is a detailed analysis of Xiaobian's selection criteria for the operating beds and the key points of their installation. More interesting content, please pay attention to the WeChat public number: Aide-188